Ctek Automation Control Application APN007 Instrukcja Użytkownika Pobierz pdf (Strona 43)

Application Note – Automation Control Application

APN007 25 July, 2014

Appendix A – Function Library

Functions are predefined building blocks used to build user defined programs. Parameters or

arguments to the functions must be separated by a single space.

The following is the current list of functions available for creating user programs: Following the

function list is a detailed description of each individual function.

Function List

Digital I/O – Set

Numeric I/O – Set

Numeric I/O – Add

Numeric I/O – Subtract

Numeric I/O – Multiply

Numeric I/O – Divide

Remote I/O - Set

Timer/Counter – Start

Timer/Watchdog – Start

Timer/Clock – Start

Timer/Counter/Ext/Clk – Start

Timer/Alarm Override - Start

Timer/Any – Stop

Motor Group Control

Application Status – Set

Input Threshold – Set

Execute New Configuration

Function Descriptions

Digital I/O – Set

Digital I/O – Set P1 P2 P3 P4

P1 and P2 define the destination that is being set while P3 and P4 define the source. Use user

defined value 1 to set a pin and user defined 0 to reset a pin.

P1 = i for input or o for output (must be digital)

P2 = pin number (must be digital)

P3 = i for input, o for output or u for user defined value

P4 = pin number or user defined value

Example: Setting digital output pin 6 to On (1)

Action = Digital I/O – Set

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Brak uwag

Ctek Automation Control Application APN007 Instrukcja Użytkownika Strona 43